Inspection Equipment
Inspection process aims for detection and rejection of broken tablets / dosage form.
Electronic Tablet Counter with Gross check Weighing and Inspection System
An advanced check-weighing system integrated with the DMC series tablet counters for detection and rejection of broken tablets. Compact and extremely accurate, tare and gross weights of each container are measured before and after filling by means of technologically advanced load cells with an accuracy of 50mg. This allows online rejection of invalid containers when the filled weight exceeds preset allowable weight range. The Tare/Gross weighing stations with servo controlled bottle transfer system can be offered with the DMC120, 60S and 60T tablet counter models.
Electronic Tablet Counter with Gross check Weighing and Inspection System
- Accuracy (based on 150mg tablet weight tolerance within 4%): Up to ½ piece over/undercount detection under 30 counts/bottle, Up to 1 piece over/undercount detection under 100 counts/bottle
- Capacity: Max. 12000 tablets per minute based on diameter 8mm/uncoated tablets. Actual speeds will vary based on bottle neck diameter and the shape and size of the product.
- Bottle size ranges: Diameter 30-100mm, Height 40-200mm
- Dimension: 4,400 (L) x 1,620 (W) x 2,028 (H) mm (DMC120W)
- Net weight: 3,000kg
Tablet / Capsule Vision Inspection System
Tablet / Capsule Vision Inspection System has been developed for higher regulatory standards of the vision inspection needs. Tablet / Capsule Vision Inspection System detects major defects in the products incl. broken, dent capsules or black spots in soft capsules on a tablet counter while they are moving on the vibratory trays. Upon detection, the bottle containing any defective product is removed from the conveyor. With a surprisingly easy setup method and its ability to integrate into the existing tablet counter of any brand, Tablet / Capsule Vision Inspection System is a must have inspection system for all tablet/capsule packaging operations. 21 CFR Part 11 compliance package available
Tablet / Capsule Vision Inspection System
- You thought there was a placeholder text here, but it was me DIO!
Seal Inspection System
Seal Inspection System does seal integrity testing and seal quality analysis. Seal Inspection System inspects and analyzes container or package seals using a non-destructive / non-invasive method of thermal vision system. It is the most advanced container seal inspection technology in the world today. A thermal imaging scan analysis of the seal area through the cap can be produced instantly, detecting common seal defects incl. under or overheated seals, incomplete and missing seals immediately after the package has been sealed by means of Cooled Thermal Imaging Camera. With no affects to the quality of products, it can be added to or integrated with the current packaging lines.
Seal Inspection System
- You thought there was a placeholder text here, but it was me DIO!